SPORTEC® fusion
Preventing injury and damage to joints in indoor sports facilities
SPORTEC® fusion consists of a technically advanced elastic layer made from SPORTEC® standard material and a tried and tested SPORTEC® UNI classic or SPORTEC® purcolor floor covering. This combination prevents damage to joints and other injuries and is therefore particularly recommended for indoor sports facilities in schools, leisure centres and multi-purpose buildings. The elastic layer and the top layer are delivered as pre-fabricated double-layer rolls. Less time is required during installation, because only the adhesion of the floor covering must be performed on the substrate.
Colour(s)
purcolor light grey
purcolor blue
purcolor red
VOC emission rating
A+
Technical Data
Material |
Top layer: Fine-grain EPDM colour granules bonded with PU-elastomer. Elastic layer: Fine-grain recycled tyre rubber granules bonded with PU-elastomer. |
Note |
The elastic layer and the top layer are delivered as pre-fabricated double-layer rolls. |
Thickness(es) |
8 mm (± 0.6 mm) |
Roll width |
1,250 mm (± 1.5 %) |
Roll length |
15 m (± 1.5 %) |
Downloads
Data sheet PDFInstallation instruction PDF
Cleaning and care instruction PDF
Sie sehen gerade einen Platzhalterinhalt von Standard. Um auf den eigentlichen Inhalt zuzugreifen, klicken Sie auf den Button unten. Bitte beachten Sie, dass dabei Daten an Drittanbieter weitergegeben werden.
Weitere Informationen