KRAITEC® step roof FPO
KRAITEC® step with extruded plastic sheeting for flat roofs
KRAITEC® step roof FPO is a protective mat made of rubber granules with an FPO backing; it is designed for use on flat roofs with an FPO foil covering as a walkway for maintenance, inspection and installation . KRAITEC® step roof FPO is also used as a protective layer under roof structures (e.g. solar and antenna systems). KRAITEC® step roof FPO features an FPO backing with an integrated fleece layer. The FPO coating enables permanent bonding to the FPO roofing felt by means of hot-air welding to prevent lifting or slipping.
![KRAITEC step roof FPO](https://www.kraiburg-relastec.com/kraitec/wp-content/uploads/sites/5/2017/07/step-roof-fpo.png)
Technical Data
Material |
Polyurethane-bonded recycled rubbergranulate with FPO cladding (PP) on the bottom.(typical rubber smell possible) |
Colour |
red, green, grey or black (slight material-related colour variations possible) |
Surface |
smooth with open pores, bevelled edges |
Lower side |
FPO-cladding with drainage channels |
Length x Width x Thickness |
500 mm x 500 mm, 30 mm |
Tolerances |
length and width ± 1.5 %, thickness ± 2 mm |
Weight slab |
approx. 5.3kg |
Downloads
Data sheet PDFInstallation instruction PDF
Applications of this product
Installation of KRAITEC® step roof PVC/FPO using the hot-air welding method
Sie sehen gerade einen Platzhalterinhalt von Standard. Um auf den eigentlichen Inhalt zuzugreifen, klicken Sie auf den Button unten. Bitte beachten Sie, dass dabei Daten an Drittanbieter weitergegeben werden.